0 items in the shopping bag
“The Powermax30® XP is a highly portable plasma cutting system that can handle a wide range of applications. A unique “”two-in-one”” design provides high-power capability for thick metal cutting, as well as the FineCut® consumables for detailed, thin metal cutting. The versatile 30 amp system uses air or nitrogen to cut electrically conductive metals, such as mild steel, stainless steel, or aluminum.
This model includes the Powermax30 XP® Power Supply (120-240v), the Duramax LT 15ft hand held torch, 240 V/20 A plug with adapters for 120 V/15 A and 240 V/20 A circuits, plastic carry case with strap, Shade 5 safety glasses, (1) pair of work gloves and a standard work lead. Hypertherm’s “CSA” models are for use in the Americas and Asia, except China.
Material Type: Mild steel, stainless steel, aluminum”
Only logged in customers who have purchased this product may leave a review.
|Recommended||10 mm (3/8")||500 mm/min (20 ipm)|
|12 mm (1/2")||250 mm/min (10 ipm)|
|Severance||16 mm (5/8")||125 mm/min (5 ipm)|
Cutting with 120 V input power
Use FineCut nozzle and deflector for cutting at 120 V input power. When operating at the maximum recommended output of 25 A, the cut capacities are:
- 6 mm (1/4") at 482 mm/min (19 ipm)
- 10 mm (3/8") at 203 mm/min (8 ipm)
- 12 mm (1/2") at 76 mm/min (3 ipm)
|Input voltages||120-240 V, 1-PH, 50/60 Hz|
|Input current @ 3.8 kW||120-240 V, 1-PH, 25-18.8 A|
|Output current||15-30 A|
|Rated output voltage||125 VDC|
|Duty cycle @ 40°C (104°F)||35%, 240 V
20%, 120 V
|Open circuit voltage (OCV)||256 VDC|
|Dimensions with handles||356 mm (14.0") D; 168 mm (6.6") W; 305 mm (12.0") H|
|Weight w/ 4,5 m (15') torch||CSA: 9.7 kg (21.4 lbs)
CE, CCC: 9.5 kg (21 lbs)
|Gas Supply||Clean, dry, oil-free air or nitrogen|
|Recommended gas inlet
flow rate / pressure
|113.3 l/min (4 scfm) at 5.5 bar (80 psi)|
|Input power cable length||3 m (10')|
|Power supply type||Inverter - IGBT|
|Engine drive requirement||5.5 kW for full 30 A output|
|Certifications||CSA-certified for use in the Americas and Asia, except China
CE, C-Tick, CU/GOST, Ukr, and Serbian — for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted.
CCC for use in China.
|Warranty||Power supplies have a 3-year warranty and torches a 1-year warranty.|
Duramax LT torch™
- Designed to withstand impact and heat.
- Twice the consumable life* and 70% more efficient on average for lower cost of cutting.
* compared to Powermax30
Duramax LT consumables
|Shield/Deflector||Retaining cap||Nozzle||Electrode||Swirl ring|
Look for the yellow package.
|Consumable type||Torch type||Amperage||Shield/Deflector||Retaining cap||Nozzle||Electrode||Swirl ring|
|Drag cutting||Hand||30||420116||420114||420118 *||420120||420211|
* Standard nozzle and electrode kit 428243 also available containing a quantity of 2 electrodes (420120) and 2 standard nozzles (420118).
** FineCut nozzle and electrode kit 428244 also available containing a quantity of 2 electrodes (420120) and 2 FineCut nozzles (420117).
For more information on HyAccess consumables, visit the HyAccess product page.
|Retaining cap||Nozzle||Electrode||Swirl ring|
|Consumable type||Torch type||Amperage||Retaining cap||Nozzle, cutting||Nozzle, gouging||Electrode||Swirl ring|
For a full torch and consumable breakdown of the handheld plasma systems please download the full catalog.
Essential consumable kits keep your Powermax up and running with an array of genuine Hypertherm cutting consumables.
See chart below for kit contents and ordering information.
HyAccess consumables give you the ability to cut in hard-to-reach places.
|Part #||Part type||Amperage/description||Qty|
|420137||Electrode||15 - 45 A||2|
|420144||Nozzle, cutting||15 - 45 A||1|
|420147||Nozzle, gouging||15 - 45 A||1|
|420148||Retaining cap||15 - 45 A||1|
|420211||Swirl ring*||15 - 45 A||1|
*Swirl ring (220670) is also compatible.
HyAccess cutting starter pack
HyAccess gouging starter pack